fam_Espresso machine · Single boiler
Quick Mill Pop-up
Manuals, maintenance, water filters, troubleshooting and spare parts for your machine, all in one place.
- Heating system
- Single boiler
- Pump
- Vibration pump
- Boiler
- 0.45 l
- Water tank
- 1.8 l
- Portafilter
- 58 mm
- Power
- 1260 W
- Temperature
- PID
Maintenance
How to look after your Pop-up
A single boiler machine, such as the Profitec GO or the Quick Mill Silvano and Pippa, heats coffee and steam in the same boiler. It needs daily cleaning, backflushing if it has a three-way valve and descaling as described in the manual. Here is the schedule and the products we recommend.
Good to know about the Quick Mill Pop-up
Coffee temperature is set between 40 and 105 °C and steam temperature between 130 and 140 °C in the display menu.
Eco and standby can be activated after 30, 60 or 90 minutes, or switched off with 0.
Quick Mill recommends regular descaling with a non-toxic descaler for espresso machines. Brush the group gasket every week.
-
Every day
- Purge and wipe the steam wand after every use
- Rinse the portafilter and basket, empty the drip tray
- Backflush with water (if the machine has a three-way valve)
-
Every week
- Backflush with Cafetto EVO (if the manual says so)
- Soak the portafilters and baskets
- Steam tip in milk system cleaner
- Brush the group gasket
-
Every month
- Wash the water tank
- Soak the shower screen
- Measure the water hardness if you change water source
-
Every 2–12 months
- Descale as described in the manual (usually every 2–3 months)
- Replace the tank filter (every 2–3 months)
- Replace the group gasket and shower screen (every 6–12 months)
Essential maintenance kit
Cleaning detergent, milk system cleaner, blind basket and brush. Everything you need for daily and weekly cleaning.
Cleaning products
Tools
Wear parts for Quick Mill Pop-up
Original parts that fit your model. Replace the group gasket and shower screen every 6–12 months. How to replace them
Upgrades
A bottomless portafilter shows you instantly if your coffee is channelling. A spring-loaded tamper, a distribution tool and a precision basket give you more even extraction, shot after shot.
Descaling
Water and filters
The right water protects your machine
The target is 2–4 °dH. With soft water and a filter in the tank, the longer interval is enough. Do not use distilled water.
Water tank
The Pop-up runs from a water tank. Use an in-tank filter and replace it every 2–3 months.
Troubleshooting and guides
What do you need help with?
Display and lights
Back to categories ↑Noise
Back to categories ↑No guide matches. Ask us and we will help you.
Manuals and spare parts
