
fam_Espresso machine · Single boiler
Profitec GO 2.0
Manuals, maintenance, water filters, troubleshooting and spare parts for your machine, all in one place.
- Heating system
- Single boiler
- Pump
- Vibration pump
- Boiler
- 0.3 l
- Water tank
- 2.8 l
- Water
- Water tank
- Temperature
- PID
- Portafilter
- 58 mm
- Power
- 1300 W
Maintenance
How to look after your GO 2.0
A single boiler machine, such as the Profitec GO or the Quick Mill Silvano and Pippa, heats coffee and steam in the same boiler. It needs daily cleaning, backflushing if it has a three-way valve and descaling as described in the manual. Here is the schedule and the products we recommend.
Good to know about the Profitec GO 2.0
Profitec normally specifies about 7 minutes before the machine is ready to brew.
Ideal water is 2–6 °dH. The supplied filter reduces limescale deposits and improves the taste.
In ECO mode the heating is switched off after a set time while the machine is on. You set the coffee and steam temperatures separately in the menu.
-
Every day
- Purge and wipe the steam wand after every use
- Rinse the portafilter and basket, empty the drip tray
- Backflush with water (if the machine has a three-way valve)
-
Every week
- Backflush with Cafetto EVO (if the manual says so)
- Soak the portafilters and baskets
- Steam tip in milk system cleaner
- Brush the group gasket
-
Every month
- Wash the water tank
- Soak the shower screen
- Measure the water hardness if you change water source
-
Every 2–12 months
- Descale as described in the manual (usually every 2–3 months)
- Replace the tank filter (every 2–3 months)
- Replace the group gasket and shower screen (every 6–12 months)
Essential maintenance kit
Cleaning detergent, milk system cleaner, blind basket and brush. Everything you need for daily and weekly cleaning.
Cleaning products
Tools
Wear parts for Profitec GO 2.0
Original parts that fit your model. Replace the group gasket and shower screen every 6–12 months. How to replace them
Upgrades
A bottomless portafilter shows you instantly if your coffee is channelling. A spring-loaded tamper, a distribution tool and a precision basket give you more even extraction, shot after shot.
Accessories for your GO 2.0
Original accessories and wooden trim made specifically for your machine.
Descaling
Water and filters
The right water protects your machine
The target is 2–4 °dH. With soft water and a filter in the tank, the longer interval is enough. Do not use distilled water.
Water tank
The GO 2.0 runs from a water tank. Use an in-tank filter and replace it every 2–3 months.
Troubleshooting and guides
What do you need help with?
Display and lights
Back to categories ↑Noise
Back to categories ↑No guide matches. Ask us and we will help you.
Manuals and spare parts


