fam_Espresso machine · E61 heat exchanger
Quick Mill Rubino+
Manuals, maintenance, water filters, troubleshooting and spare parts for your machine, all in one place.
- Heating system
- Heat exchanger
- Group
- E61
- Pump
- Vibration pump
- Boiler
- 1.8 l
- Water tank
- 3 l
- Portafilter
- 58 mm
- Temperature
- PID
Maintenance
How to look after your Rubino+
An E61 heat exchanger machine does best with daily backflushing with water, detergent once a week and a new group gasket about once a year. Here is the schedule and the products we recommend.
Good to know about the Quick Mill Rubino+
The Rubino+ automatically goes into standby if you have not brewed coffee for 60 minutes. You set standby and eco in the menu.
Let the machine reach the set temperature before you brew. The temperature is shown on the OLED display.
Quick Mill says you should fill the tank with soft, clean water and use a water softener if your tap water is hard.
-
Every day
- Purge and wipe the steam wand after each use
- Backflush with water and a blind basket
- Rinse the portafilter and basket, empty the drip tray
-
Every week
- Backflush with Cafetto EVO
- Soak the portafilters and baskets
- Soak the steam tip in milk system cleaner
- Brush the group gasket
-
Every month
- Wash the water tank
- Change the water in the boiler
- Soak the shower screen and dispersion block
-
Every 6–12 months
- Replace the group gasket and shower screen
- Lubricate the cam
- Replace the tank filter (every 2–3 months)
Essential maintenance kit
Cleaning detergent, milk system cleaner, blind basket and brush. Everything you need for daily and weekly cleaning.
Cleaning products
Tools
Wear parts for Quick Mill Rubino+
Original parts that fit your model. Replace the group gasket and shower screen every 6–12 months. How to replace them
Upgrades
A bottomless portafilter shows you instantly if your coffee is channelling. A spring-loaded tamper, a distribution tool and a precision basket give you more even extraction, shot after shot.
Accessories for your Rubino+
Original accessories and wooden trim made specifically for your machine.
Water and filters
The right water protects your machine
The target is 2–4 °dH. Do not use distilled water; the machine needs minerals for the level sensor to work.
Water tank
The Rubino+ runs from a water tank. Use an in-tank filter and replace it every 2–3 months.
Troubleshooting and guides
What do you need help with?
Noise
Back to categories ↑No guide matches. Ask us and we will help you.
Manuals and spare parts
