Wiedemann Accessories

Wiedemann Manufaktur: tillbehör i trä för espresso - Wiedemann tillbehor

Wiedemann Manufaktur: wooden espresso accessories

Control elements, tools, and storage to match your machine.

About Wiedemann Manufaktur and the craft behind it

Wiedemann Manufaktur is a German craft brand that makes details for your espresso corner from solid hardwood. The wooden parts are hand-treated with organic hard wax oil, and several are made by Lake Constance in Baden-Württemberg in southern Germany. Most are available in olive, walnut, oak, and black oak. This lets you match the machine's control elements, the tools on your counter, and the wall storage in the same wood.

The range includes control elements, tools, and storage for your machine. It features wooden parts that replace original parts on machines from brands including ECM, Profitec, Rocket, and La Marzocco. There are also separate portafilter heads that you can pair with a wooden handle from Wiedemann Manufaktur. The range also includes steam wands, a milk jug, a stainless steel travel mug, and a care set to keep the wood in good condition.

Wooden details for ECM, Profitec, and Rocket

Details that replace the machine's original parts, in olive, walnut, oak, or black oak.

Flow Control control element in wood

For ECM and Profitec with E61 and flow control

Solid hardwood and metal. Fits machines that already have flow control installed and mounts without tools.

View the flow control knob

Wooden brew group lever for ECM

For ECM machines with lever mechanism

Approximately 70 mm long, with an internal M8 thread in stainless steel and a polished metal top that contrasts with the natural wood.

See the brew group lever

Wooden lever arm for ECM

With original chrome-plated ECM end cap

Solid hardwood lever arm with an internal M8 thread in stainless steel. It has ECM's own chrome-plated end cap.

See the lever arm

Wooden cup rail for Rocket Appartamento

Replaces the original rail on the Appartamento

Entirely made of solid hardwood from sustainably managed forests. Finger tabs replace the screws, so replacement takes just a few steps.

See the cup rail

View all

WDT and tools to keep your counter tidy

From distribution in your Portafilter to wiping it down afterward.

WDT, Wiedemann Distribution Tool

Fine metal needles and a turned wooden handle

Breaks up clumps and evenly distributes the ground coffee in your Portafilter before tamping. The wooden parts are handmade by Lake Constance.

See the WDT tool

WDT holder

Wood and metal stand for the WDT tool

Gives the WDT tool a permanent place on the counter. It's an alternative for those who can't use Wiedemann Hangup.

See the WDT holder

Tool holder for WDT and cleaning brush

Magnetic, approximately 15 g

Holds the WDT tool and cleaning brush. It attaches to the short and long tamper station, directly to the machine's panel, or to other magnetic surfaces.

View the tool holder

Barista cloth v2

33 × 33 cm, 100% cotton

Dark gray cloth made from heavy cotton with an extra-long cord, washable at 60 °C. Woven and sewn in Germany. Available as a single cloth or in a pack of 3.

View the barista cloth