Precision brewer for manual coffee brewing
Marco SP9 Single is a professional precision brewer for manual coffee brewing, developed for cup-by-cup service with high repeatability. It is well suited to brewing methods such as Chemex, V60 and Kalita, and provides controlled flow for consistent extraction in every serving. For cafés, showrooms and ambitious environments where both speed and results matter, this is a well-considered solution among filter coffee brewers. An important point to note is that installation requires a fixed water connection and is best suited to professional or well-planned environments.
Key features
- ✓ Single-serve system for precise brewing, compatible with Chemex, V60, Kalita and similar manual methods
- ✓ 4 L direct dispense and capacity of up to 25 cups per hour at 180 ml
- ✓ Under-counter unit that frees up workspace and creates a clean, front-facing appearance
- ✓ Electronic control with no need for priming at startup
- ✓ Compact physical and environmental footprint for businesses where efficiency and precision go hand in hand
Details
| Product | SP9 Single |
| Order code | 1000832 |
| Type | Single-serve precision brewer for under-counter installation |
| Compatible brewing methods | Chemex, V60, Kalita and more |
| Power | 2.4 kW at 230 V |
| Direct dispense | 4 L |
| Capacity | 25 cups per hour (180 ml cups) |
| Brew head dimensions | 191 x 131 x 420 mm (D x W x H) |
| Brew head dimensions according to previous product data | 193 x 132 x 420 x 226 mm (D x W x H x T) |
| Under-counter boiler dimensions | 395 x 155 x 565 mm (D x W x H) |
| Boiler dimensions according to previous product data | 394 x 155 x 585 mm |
| Height from outlet to countertop | 230 mm |
| Water connection | 3/4" BSP connection |
| Water pressure | 14.5–145 psi (100–1000 kPa, 0.1–1 MPa) |
| Packed weight | 4.5 kg (head) + 14.1 kg (boiler), 18.6 kg total in 2 cartons |
| Weight according to previous product data | 12 kg |
| Head packaging dimensions | 585 x 290 x 216 mm |
| Boiler packaging dimensions | 510 x 270 x 715 mm |
| Boiler heating time | Approximately 15 minutes during initial heating |
| Control | Electronically controlled |
| Priming | Not required |
| Power connection EU model | 2-pole CEE-7 plug |
| Power connection UK model | UK 3-pin plug |
| Power connection US model | Supplied with a suitable plug for the market |
Care instructions
Use a built-in water filter that meets the specification, and flush the inlet hose or water line with several liters of water before first use or after a new installation. The machine must be installed in accordance with local plumbing and electrical regulations, and if it is placed in a cabinet, it needs at least 50 mm of clearance on the sides and at the back. The brew head's drip tray must be connected to a drain. After extended periods of inactivity, the system should be flushed to remove stagnant water and any impurities, while the water filter should be checked and replaced if necessary. Regular cleaning, ongoing maintenance, and descaling when applicable are important for performance and longevity.
About the manufacturer
Marco Beverage Systems develops commercial equipment for beverage preparation, focusing on precision, reliability, and professional service. We especially appreciate that their products are designed for real-world use in demanding environments, where correct installation, clean water, and ongoing maintenance are essential for consistent results over time.
For those who want to serve filter coffee with the same precision every time, the Marco SP9 Single is a strong choice. It combines a compact design, professional capacity, and precise manual brewing control in one system.
Frequently asked questions
▾Which brewing methods work with the Marco SP9 Single precision brewer?
It is compatible with most manual brewing methods, such as Chemex, V60, and Kalita. This makes it a flexible solution for manual coffee brewing in professional environments.
▾How much coffee can this filter coffee brewer produce per hour?
The Marco SP9 Single has a capacity of up to 25 cups per hour, based on 180 ml cups. It also has a 4-liter direct-draw outlet.
▾Does the Marco SP9 Single require a permanent installation and special maintenance?
Yes, the model requires a 3/4-inch BSP water connection and must be installed in accordance with local plumbing and electrical regulations. Regular cleaning, flushing after periods of inactivity, and checking the water filter are recommended for consistent brewing quality.
Important for non-EU customers!
Important tax information for customers outside the EU
- Countries outside the EU, United Kingdom, Switzerland, and Norway: Price shown excluding VAT.
- We do not collect any VAT for customers outside the EU. Therefore, import duty must be paid by the customer to their customs authority upon import.
- EU countries: Price shown including local VAT
Read more here
Warranty
- 1 year warranty
- The warranty does not cover cosmetic wear or damage.
- For questions, contact info@barista-espresso.se
- Read more about our warranty terms
Shipping & returns
We deliver worldwide
- Orders within the EU, Switzerland, Norway, and the United Kingdom can be checked out automatically; orders from other countries are processed manually.
- Same-day order processing.
- Most products are shipped from Sweden.
Delivery courier
- DHL
- UPS
- PostNord
- DBSchenker
Delivery time
- 1 - 5 business days depending on the delivery address
Shipping costs
- Shipping costs are calculated automatically at checkout.
Return policy
- 14-day right of withdrawal
- The item must be returned unused
- Contact us at info@barista-espresso.se for return inquiries.
