Skip to content
Macap M42D RV

fam_coffee grinder · Flat burr grinder

Macap M42D RV

Manuals, maintenance, water filters, troubleshooting and spare parts for your machine, all in one place.

Burr type
Flat
Burrs
58 mm
Grind adjustment
Stepless
Motor
300 W
Bean hopper
0.5 kg
Suitable for
Espresso

Maintenance

How to look after your M42D RV

A flat burr grinder, such as the Eureka Mignon, Rocket Faustino or Macap M42, needs daily brushing, regular cleaning pellets and new burrs after the number of kilos specified by the manufacturer. Here is the schedule and the products we recommend.

Good to know about the Macap M42D RV

Adjust with the motor running

Macap states that the grind should be changed with the motor running if there is coffee between the burrs, and with the motor off if the burr set is empty.

Three doses and Push and Grind

The M42D has three programmable doses that are set in steps of 0.05 seconds. Choose Standard or Push and Grind mode depending on how you want to start grinding.

No more than one minute at a time

Continuous grinding should only last for short periods and never more than one minute at a stretch, so that the motor does not overheat. If the overheating protection trips, let the grinder cool down for at least an hour.

  1. Every day
    • Brush out the spout and around the fork
    • Wipe the grinder with a dry cloth
    • Check the dose with a scale after changing the grind
  2. Every week
    • Grind cleaning pellets, for example Cafetto GC2
    • Empty the bean hopper and wash it by hand
    • Brush away coffee around the adjustment dial
  3. Every month
    • Open the grinder and brush the burrs
    • Brush the grinding chamber and the adjustment thread
    • Check the zero point
  4. After 250–500 kg
    • Replace the burrs according to the manufacturer's kg figure
    • Calibrate the zero point after replacement
    • Run in new burrs with cheaper beans

Essential maintenance kit

Cleaning detergent, milk system cleaner, blind basket and brush. Everything you need for daily and weekly cleaning.

Cleaning products

Urnex Grindx grinder cleaning beans 430g
Urnex Grindx grinder cleaning beans 430g
$41.00In stock

Tools

Cleaning brush for coffee grinder
Cleaning brush for coffee grinder
$12.00In stock
Cleaning Brush Grindminder 2
Cleaning Brush Grindminder 2
$15.00In stock

Wear parts for Macap M42D RV

Original parts that fit your model. Replace the group gasket and shower screen every 6–12 months. How to replace them

Macap Burrs 58 mm M4D, M5D, M42D - Replacement Part OEM number: C0004M135A
Macap Burrs 58 mm M4D, M5D, M42D
$58.00In stock
Macap Bean holder M42 - Spare part OEM number: C00020106
Macap Bean holder M42
$40.00In stock

Upgrades

A bottomless portafilter shows you instantly if your coffee is channelling. A spring-loaded tamper, a distribution tool and a precision basket give you more even extraction, shot after shot.

WDT - Wiedemann Distribution Tool
WDT - Wiedemann Distribution Tool
$48.00In stock
Timemore Black Mirror 2 - Coffee Scale
Timemore Black Mirror 2 - Coffee Scale
$71.00In stock

Accessories for your M42D RV

Original accessories and wooden trim made specifically for your machine.

Macap M42-Labo bean hopper 500 g - Spare part OEM number: C00071635
Macap M42-Labo bean hopper 500 g
$58.00In stock
Macap M42-Labo bean hopper 1000 g - Spare part OEM number: C00071636
Macap M42-Labo bean hopper 1000 g
$73.00In stock
Macap M42 Drip Tray - Spare Part OEM number: C00071642
Macap M42 Drip Tray
$14.00In stock
Macap MXD/M7D/M42D coffee tamper - Spare part OEM number: C204040
Macap MXD/M7D/M42D coffee tamper
$121.00In stock
Macap MXD/M7D/M42D portafilter support - Spare part OEM number: C204041
Macap MXD/M7D/M42D portafilter support
$66.00In stock
CPM2 Dynamometric Tamper 58 mm
CPM2 Dynamometric Tamper 58 mm
$155.00In stock

Troubleshooting and guides

What do you need help with?

Manuals and spare parts

Documents and parts

Back to top